Ordering Code
DB |
13W3 |
S |
C |
S |
0 |
0 |
0 |
75 |
00 |
|
1 |
2 |
3 |
4 |
5 |
6 |
7 |
8 |
9 |
1. Series No.:
C2W2,C3W3,C5W1,C5W5,C7W2,C8W8,C9W4,11W1,
13W3,17W2,17W5,21W1,21W4,25W3,27W2,36W4.
2. Connector Type:
P=PLUG(MALE)
S=SOCKET(FEMALE)
3. Contact type:
P=High power contact
C=Coaxial contact
4. Contact tail Style:
V=Straight Dip type
H=R/A Dip type
S=Solder cup type
5. Coaxial contact Plating:
0:Full Gold plated over Ni
1:15u" Gold plated over Ni
3:30u: Gold plated over Ni
5:50u" Gold plated over Ni
6. Signal contact plating:
0:Full Gold flash over Ni
1:15u" Gold plated over Ni
3:30u" Gold plated over Ni
N:without Signal Contact
7. Insulator color.
0=Black
1=White
2=Bule
3=Grey
8. Parformance:
High power contact:
10A=10,20A=20,30A=30,40A=40
Coaxial contact:
50=50 OHMS 75=75 OHMS
9. Mounting Style:
Straight Dip & Solder cup type:
00:Riveted front and rear shell with 3.05mm hole
01:Riveted #4-40 UNC nuts on front shell DIM.L=.8mm(Standard)
02:Riveted #4-40 UNC nuts on rear shell DIM.L=4.0mm(Standard)
03:Riveted #4-40 UNC close ground stand-off rear shell
DIM.L=8.3mm(Standard)
04:Riveted #4-40 UNC nuts on rear shell DIM.L=4.0mm preloaded
#4-40UNC hex scerws
05:Riveted #4-40 UNC close groundstand-off rear shell DIM.L=8.3
mm pre-loaded #4-40UNC hex scerws
Right angle Dip type:
00:Riveted front & rear shell with 3.05mm holes.
01:Riveted #4-40 UNC ground tabs with 3.05mm holes.
02:Riveted #4-40 UNC ground tabs with w/boardlock
03:Riveted ground tabs w/board-lock & pre-loaded #4-40 UNC hex scsrws
04:Riveted ground tabs pre-load-ed #4-40 UNC hex scarws
|